Radial Stock Conveyors

Radial stock conveyors are designed to provide flexibility based on the facility’s location, land conditions, and specific customer needs. The belt conveyor chassis is connected to the ground via a fixed joint at the tail module. High-strength steel construction supports the weight of the intermediate modules and the drive module, with these components attached to an axle mounted on wheels. These wheels are filled to prevent them from becoming loose.

The gearbox is driven by a coupled motor, and the conveyor is equipped with a special brake system to prevent any unintended movement due to environmental conditions during operation or when the system is stopped.

The fixed hinge point at the tail module serves as the center of rotation, allowing the conveyor to turn both clockwise and counterclockwise within the permitted angle. This design enables a larger stockpile compared to fixed stock belt conveyors.

Key Features:

• Ability to create a larger stocking area with a single conveyor
• Loosen-proof special wheels for added durability
• Heavy-duty axle with high resistance
• Brake system for complete control of wheel movement
• Available in widths of 600, 800, 1000, and 1200 mm, with customizable lengths
• Two types of chassis: cage chassis or Sigma Twist Sheet Chassis, based on application needs
• Walking platforms available as one-sided, double-sided, or U-platform, tailored to customer specifications for easy operation monitoring and maintenance
• Cleaning device to remove material residues from the rubber belt
• Mechanical brake on the drive drum to prevent material from sliding back
• Pull-cord switch along the walking platform for emergency stops
• Dust exit is prevented by a hinged cover that can be easily opened and closed