Volume
45m^3
Grizzly Length (mm)
5000 mm
Motor Power (kW)
2 x 20 kW
Capacity (ton/hour)
450-550 t/h
Volume
35m^3
Grizzly Length (mm)
5000 mm
Motor Power (kW)
2 x 20 kW
Capacity (ton/hour)
350-450 t/h
Volume
25m^3
Grizzly Length (mm)
4000 mm
Motor Power (kW)
2 x 20kw
Capacity (ton/hour)
200 – 300 t/h
Volume
15m^3
Grizzly Length (mm)
4000 mm
Motor Power (kW)
1 x 20 kW
Capacity (ton/hour)
150-200 t/h
PYRAMIDS Feeders and Bunkers are designed to maximize plant efficiency by delivering a consistent, controlled material flow while protecting downstream equipment from excessive loads. Their robust construction, adjustable operating parameters, and low-maintenance design ensure reliable performance, reduced wear, and long service life, making them an ideal solution for high-capacity crushing and screening operations.
PYRAMIDS Vibrating Feeders and Bunkers are essential components in any crushing and screening plant, engineered to ensure a controlled, uniform material flow to crushers and processing equipment. Strategically positioned ahead of primary jaw or impact crushers, they regulate the rate of material introduction into the process and protect downstream equipment from overloading and surge conditions.
The PYRAMIDS Vibrating Feeder operates on an exciter-driven linear vibration principle that efficiently conveys and pre-screens raw material before it enters the crusher. The grizzly bar section pre-separates fines and undersized material, allowing them to bypass the crusher entirely and reducing wear on crusher liners while increasing effective crushing capacity.
All PYRAMIDS Feeders and Bunkers are available in a wide range of widths, lengths, and throughput capacities to suit any plant configuration. Vibration frequency and amplitude are precisely adjustable to match the required feed rate and material characteristics for each application. Units are manufactured from high-strength structural steel with reinforced side panels and sealed exciter units designed for extended maintenance-free intervals.
There are 4 models, from the CPG-09 to the CPG-13, covering 150-550 t/h with a bunker volume from 15 m3 to 45 m3 and motors from 20 kW to 40 kW.
The feeder delivers a controlled, uniform flow of material to the primary jaw or impact crusher and protects the equipment after it from overloading and surges.
The grizzly bars separate fines and undersized material before the crusher, so they bypass it. This reduces wear on the crusher liners and increases effective crushing capacity.
Yes. Vibration frequency and amplitude can be adjusted to match the required feed rate and the material being processed.
All Pyramids Machine equipment is manufactured at our factory in El-Saff, Giza, Egypt. To get a quote, use the "Get a Quote" button on this page or contact our sales team on WhatsApp or by phone at +20 108 002 2583.
Enter your information to receive the full technical data sheet for this machine.
